Image for illustration purposes only
2 x 5mm DIN6325 Thru Hardened Dowel Pin
DIN6325 Metric Hardened & Ground Dowels are produced to a precise Interference fit. Our standard metric size range is from 1mm up to 25mm diameter and is produced from material 1.3505 (100cr6) Through Hardened to HRC58-62. This pin is configured to have a radius at one end and a ‘crown’ at the other – a crown can be more easily described as a radius on top of a chamfer.
If you require chamfered end pins instead of rad/crown configuration please refer to our specifcation A01.
Metric sizes are offered with an 'm6' tolerance band which is explained more clearly in the chart below.
| Diameter Range | Tolerance Band (m6) |
| From 0 to 3mm | +0.002 / +0.009mm |
| From 3 to 6mm | +0.004 / +0.012mm |
| From 6 to 10mm | +0.006 / +0.015mm |
| From 10 to 18mm | +0.007 / +0.018mm |
| From 18 to 30mm | +0.008 / +0.021mm |
Sizes outside of this range can be produced to order, please enquire.
| UOM | Metric |
|---|---|
| Diameter | 2mm |
| Length | 5mm |
| Material | Thru Hardened Steel |
There are no reviews for this product yet. Be the first to add one!
