Pinstructure

P Clips are used extensively in many industries for securing pipes, hoses and cables. The snug fitting EPDM liner enables the clips to clamp the pipes, hoses and cables firmly without any possibility of chafing or damage to the surface of the component being clamped.

The bandwidth is 12.7mm (1/2") with an M6 fixing hole.

• Material: W1 & W5
• Available without liner & alternative fixing holes/bandwidths

Sizes 4mm to 170mm available from stock.

Our stock range is supplemented by onsite manufacturing of unusual dimensional or material specifications.

These have reinforced band ends for extra strength to keep them firm where a high load is involved. They are available in the following configurations:

• 12mm, 15mm, 20mm & 25mm bandwidths
• Material: W1 & W4 from stock, W3 & W5 to order
• For clips fitted with a liner, standard material is Neoprene

Sizes 4mm to 70mm available from stock, further sizes to order.

The Nylon series of 6 adjustable sizes do not require a liner, the product being sufficiently pliable to eliminate chafing or damage. They have serrated mating surfaces to assist positive location.

• 12.7mm (1/2") bandwidth
• M5 fixing hole

For full specification details please download product data sheet.