Circlips are a well proven solution to numerous and recurring design problems in manufacture, assembly and maintenance. We carry extensive stocks of all sizes in regular demand.

Radially Assembled Rings

Radially Assembled Rings
My status
Skype us
 
Pdf
Login or Register to download

The prongs of these types of clips make contact with the top and bottom sides of the groove, resulting in an exceptional thrust load capacity. These clips can be fitted by hand but to improve the installation speed they can be supplied already stacked on steel strips for use with dispensers and applicators.

Our standard range consists of:

  • ‘E’ Clip, DIN 6799 (Series A67)
  • Crescent Rings (Series C67)

Available in the following materials:

  • Carbon Steel
  • Stainless steel
  • Also available in Phosphor bronze

For other materials please enquire.

Internal Circlips

Designed to fit in a groove inside the bore and acts as a simple rigid shoulder which is suitable for most normal engineering applications. A pair of Circlip pliers are required to fit and remove the clip, the depth of the fitment in a bore is limited by the reach of these pliers.

The clips within this range consist of:

  • Internal Circlip, DIN 472 (Series A68)
  • Internal Increased Abutment, DIN 984 (Series C68)
  • Internal Inverted Lug (Series I68)

Available in the following materials:

  • Carbon Steel
  • Stainless steel
  • Also available in Phosphor bronze

For other materials please enquire.

External Circlips

Externally groove mounted for the retention of shaft mounted components. As with the Internal Circlips a pair of pliers are recommended for correct fitting and removal.

The clips within this range consist of:

  • External Circlip, DIN 471 (Series A69)
  • External Increased Abutment, DIN 983 (Series C69)
  • External Inverted Lug (Series I69)

Available in the following materials:

  • Carbon Steel
  • Stainless steel
  • Also available in Phosphor bronze

For other materials please enquire.

Grip Rings

The very heavy beam construction of these clips gives them high gripping pressures direct onto the applications shaft. They are self locking which makes them a very quick fixing. The advantage with this type of circlip is that they can be easily removed and re-used without any significant marks to the appplication.

PINCO series G69 are manufactured in Carbon Steel, the designs differ whether you look to a metric or inch ring. The usual designs are:

  • Metric – cracked lugs
  • Inch – holes in the lugs

For full specification details and size range stocked, please download our product data sheets.